« back to the search result list  
HEXAMETHYLENE DIISOCYANATEICSC: 0278 (April 2017)
HMDI
1,6-Hexamethylene diisocyanate
1,6-Diisocyanatohexane
CAS #: 822-06-0
UN #: 2281
EC Number: 212-485-8

  ACUTE HAZARDS PREVENTION FIRE FIGHTING
FIRE & EXPLOSION Combustible under specific conditions. Gives off irritating or toxic fumes (or gases) in a fire.    NO open flames.    Use powder, carbon dioxide.   

 PREVENT GENERATION OF MISTS! AVOID ALL CONTACT! IN ALL CASES CONSULT A DOCTOR! FIRST AID: USE PERSONAL PROTECTION. 
  SYMPTOMS PREVENTION FIRST AID
Inhalation Burning sensation. Cough. Sore throat. Laboured breathing. Shortness of breath.  Use ventilation, local exhaust or breathing protection.  Fresh air, rest. Artificial respiration may be needed. Refer immediately for medical attention. 
Skin MAY BE ABSORBED! Redness.  Protective gloves.  Wear protective gloves when administering first aid. Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention . 
Eyes Redness. Pain. Swelling of the eyelids.  Wear face shield or eye protection in combination with breathing protection.  First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention. 
Ingestion   Do not eat, drink, or smoke during work.  Rinse mouth. Refer for medical attention . 

SPILLAGE DISPOSAL CLASSIFICATION & LABELLING
Evacuate danger area! Consult an expert! Personal protection: complete protective clothing including self-contained breathing apparatus. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. 

According to UN GHS Criteria

skull;toxiccancer;health haz
DANGER
Fatal if inhaled
Toxic in contact with skin
Causes serious eye irritation
Causes skin irritation
May cause respiratory irritation
May cause allergy or asthma symptoms or breathing difficulties if inhaled
May cause an allergic skin reaction 

Transportation
UN Classification
UN Hazard Class: 6.1; UN Pack Group: II 

STORAGE
Separated from incompatible materials and food and feedstuffs. See Chemical Dangers. Cool. Dry. Keep in the dark. Ventilation along the floor. 
PACKAGING
Unbreakable packaging.
Put breakable packaging into closed unbreakable container.
Do not transport with food and feedstuffs. 
HEXAMETHYLENE DIISOCYANATE ICSC: 0278
PHYSICAL & CHEMICAL INFORMATION

Physical State; Appearance
CLEAR COLOURLESS LIQUID WITH PUNGENT ODOUR. 

Physical dangers
 

Chemical dangers
The substance polymerizes under the influence of temperatures above 93°C. On combustion, forms toxic and corrosive fumes including nitrogen oxides and hydrogen cyanide (see ICSC 0492). Decomposes on contact with water. This produces amine and polyureas. Reacts violently with acids, alcohols, amines, bases and oxidants. This generates fire and explosion hazard. Attacks copper. 

Formula: C8H12N2O2 / OCN-(CH2)6-NCO
Molecular mass: 168.2
Boiling point: 255°C
Melting point: -67°C
Relative density (water = 1): 1.05
Solubility in water: reaction
Vapour pressure, Pa at 25°C: 7
Relative vapour density (air = 1): 5.8
Relative density of the vapour/air-mixture at 20°C (air = 1): 1.00
Flash point: 140°C o.c.
Auto-ignition temperature: 454°C
Explosive limits, vol% in air: 0.9-9.5
Octanol/water partition coefficient as log Pow: 1.08  


EXPOSURE & HEALTH EFFECTS

Routes of exposure
The substance can be absorbed into the body by inhalation of its aerosol or vapour and through the skin. 

Effects of short-term exposure
The substance is severely irritating to the eyes. The substance is irritating to the skin and respiratory tract. Inhalation may cause asthmatic reactions. 

Inhalation risk
A harmful contamination of the air will be reached rather slowly on evaporation of this substance at 20°C; on spraying or dispersing, however, much faster. 

Effects of long-term or repeated exposure
Repeated or prolonged contact may cause skin sensitization. Repeated or prolonged inhalation may cause asthma. See Notes. 


OCCUPATIONAL EXPOSURE LIMITS
TLV: 0.005 ppm as TWA.
MAK: 0.035 mg/m3, 0.005 ppm; peak limitation category: I(1); sensitization of respiratory tract and skin (SAH); pregnancy risk group: D 

ENVIRONMENT
 

NOTES
The symptoms of asthma often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation are therefore essential.
Anyone who has shown symptoms of asthma due to this substance should avoid all further contact.
Anyone who has shown skin sensitization due to this substance should avoid all further contact.
Workers exposed to this compound may also be sensitized to other isocyanates.
The odour warning when the exposure limit value is exceeded is insufficient.
Do NOT take working clothes home. 

ADDITIONAL INFORMATION
Seveso substances: Yes, categories H2  EC Classification
Symbol: T; R: 23-36/37/38-42/43; S: (1/2)-26-28-38-45 

All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.