Annual Survey of Industries 2010-2011
India, 2011 - 2012
Reference ID
IND_2010_ASI_v01_M_CSO
Producer(s)
Central Statistics Office (Industrial Statistics Wing)
Collections
Created on
Mar 27, 2014
Last modified
Jun 16, 2017
Page views
18069
Downloads
1150
Identification
Survey ID Number
IND_2010_ASI_v01_M_CSO
Title
Annual Survey of Industries 2010-2011
Country
| Name | Country code |
|---|---|
| India | IND |
Series Name
Industrial Statistics(Organised Manufacturing & Labour Sector) Survey
Series Information
The Collection of Statistics (Central) Rules, 1959 framed under the 1953 Act provided for, among others, a comprehensive Annual Survey of Industries (ASI) in India. This survey replaced both the CMI (Census of Manufacturing Industries) and SSMI (Sample Survey of Manufacturing Industries). The ASI was launched in 1960 with 1959 as the reference year and is continuing since then except for 1972. For ASI, the Collection of Statistics Act 1953 and the rules frame there-under in 1959 provides the statutory basis. The ASI refers to the factories defined in accordance with the Factories Act 1948, and thus has coverage wider than that of the CMI and SSMI put together.
Abstract
Introduction
The Annual Survey of Industries (ASI) is the principal source of industrial statistics in India. It provides statistical information to assess and evaluate, objectively and realistically, the changes in the growth, composition and structure of organized manufacturing sector comprising activities related to manufacturing processes, repair
services, gas and water supply and cold storage. The survey has so far been conducted annually under the statutory provisions of the Collection of Statistics (COS) Act, 1953 and the rules framed there-under in 1959 except in the State of Jammu & Kashmir where it is conducted under the J&K Collection of Statistics Act, 1961 and rules framed there under in 1964. From ASI 2010-11 onwards, the survey is to be conducted annually under the statutory provisions of the Collection of Statistics (COS) Act, 2008 and the rules framed there-under in 2011except in the State of Jammu & Kashmir where it is to be conducted under the J&K Collection of Statistics Act, 1961 and rules framed there under in 1964.
The Annual Survey of Industries (ASI) is the principal source of industrial statistics in India. It provides statistical information to assess and evaluate, objectively and realistically, the changes in the growth, composition and structure of organized manufacturing sector comprising activities related to manufacturing processes, repair
services, gas and water supply and cold storage. The survey has so far been conducted annually under the statutory provisions of the Collection of Statistics (COS) Act, 1953 and the rules framed there-under in 1959 except in the State of Jammu & Kashmir where it is conducted under the J&K Collection of Statistics Act, 1961 and rules framed there under in 1964. From ASI 2010-11 onwards, the survey is to be conducted annually under the statutory provisions of the Collection of Statistics (COS) Act, 2008 and the rules framed there-under in 2011except in the State of Jammu & Kashmir where it is to be conducted under the J&K Collection of Statistics Act, 1961 and rules framed there under in 1964.
Kind of Data
Census/enumeration data [cen]
Unit of Analysis
The primary unit of enumeration in the survey is a factory in the case of manufacturing industries, a workshop in the case of repair services, an undertaking or a licensee in the case of electricity, gas & water supply undertakings and an establishment in the case of bidi & cigar industries. The owner of two or more establishments located in the same State and pertaining to the same industry group and belonging to same scheme (census or sample) is, however, permitted to furnish a single consolidated return. Such consolidated returns are common feature in the case of bidi and cigar establishments, electricity and certain public sector undertakings.
Version
Version number
Version1.2
Version Date
2013-06-12
Scope
Study notes
ASI schedule is the basic tool to collect required data for the factories registered under Sections 2(m)(i) and 2(m)(ii) of the Factories Act, 1948. The schedule for ASI, at present, has two parts. Part-I of ASI schedule, processed at the CSO (IS Wing), Kolkata, aims to collect data on assets and liabilities, employment and labour cost, receipts, expenses, input items: indigenous and imported, products and by-products, distributive expenses, etc. Part-II of ASI schedule is processed by the Labour Bureau. It aims to collect data on different aspects of labour statistics, namely, working days, mandays worked, absenteeism, labour turnover, man-hours worked etc.
Topic Classification
Keywords
| Keyword |
|---|
| FIXED CAPITAL |
| WORKING CAPITAL |
| EMPLOYEES |
| WAGES AND SALARIES |
| TOTAL EMOLUMENTS |
| FUELS CONSUMED |
| DEPRECIATION |
| NET VALUE ADDED |
| TOTAL INPUT |
| TOTAL OUTPUT |
| BLOCK-A (IDENTIFICATION BLOCK FOR OFFICIAL USE) |
| BLOCK-B (TO BE FILLED BY OWNERS) |
| BLOCK-C (FIXED ASSETS) |
| BLOCK-D (WORKING CAPITAL AND LOANS) |
| BLOCK-E (EMPLOYMENT AND LABOUR COST) |
| BLOCK-F (OTHER EXPENSES) |
| BLOCK-G (OTHER OUTPUT/RECEIPTS) |
| BLOCK-H (INPUT ITEMS - Indigenous items consumed) |
| BLOCK-I (INPUT ITEMS - Directly imported items only (consumed)) |
| BLOCK-J (PRODUCTS AND BY-PRODUCTS (Manufactured by the unit)) |
Coverage
Geographic Coverage
The ASI extends its coverage to the entire country. It covers all factories registered under Sections 2(m)(i) and 2(m)(ii) of the Factories Act, 1948, where the manufacturing process is defined under Section 2(k) of the said Act. The survey also covers bidi and cigar manufacturing establishments registered under the Bidi and Cigar Workers (Conditions of Employment) Act 1966. All electricity undertakings engaged in generation, transmission and distribution of electricity registered with the Central Electricity Authority (CEA) were also covered under ASI irrespective of their employment size till ASI 1997-98. Defence establishments, oil storage and distribution depots etc. are excluded from the purview of the survey.
Universe
The survey cover factories registered under the Factory Act 1948.
Producers and sponsors
Authoring entity/Primary investigators
| Agency Name | Affiliation |
|---|---|
| Central Statistics Office (Industrial Statistics Wing) | Ministry of Statistics and PI, Government of India |
Producers
| Name | Affiliation | Role |
|---|---|---|
| CSO ( IS Wing), Kolkata | MoSPI | Analysis, Design & Processing |
| Field Operation Division, NSSO | MoSPI | Data Collection |
| Computer Centre | MoSPI | Data Dissemination |
Funding Agency/Sponsor
| Name | Abbreviation |
|---|---|
| Government of India | GOI |
Other Identifications/Acknowledgments
| Name | Affiliation | Role |
|---|---|---|
| Standing Committee on Industiral Statistics | GOI | Formulation and Finalisation of Survey Study |
| Computer Centre | MoSPI | Data Dissemination and Web hosting |
Sampling
Sampling Procedure
The sampling design adopted in ASI has undergone considerable changes from time to time, taking into account the technical and other requirements. The present sampling design has been adopted from ASI 2007-08. All the factories in the updated frame are divided into two sectors, viz., Census and Sample.
For ASI 2007-2008, the Census Sector has been defined as follows:
a) All industrial units belonging to the five less industrially developed states/ UT's viz. Manipur, Meghalaya, Nagaland, Tripura and Andaman & Nicobar Islands.
b) For the rest of the twenty-six states/ UT's., (i) units having 100 or more workers, and (ii) all factories covered under Joint Returns.
c) After excluding the Census Sector units as defined above, all units belonging to the strata (State by 4-digit of NIC-08) having less than or equal to 4 units are also considered as Census Sector units.
Sample Sector: From the remaining units excluding those of Census Sector, called the sample sector, samples are drawn circular systematically considering sampling fraction of 20% within each stratum (State X Sector X 4-digit NIC) for all the states. An even number of units with a minimum of 4 are selected and evenly distributed in two sub-samples. The sectors considered here are Biri, Manufacturing and Electricity.
Selection of State Samples: After selecting the central sample in the way mentioned above, the remaining units in the sample sector are treated as residual frame for selection of sample units for the States/UTs. Note that for the purpose of selecting samples from the residual frame for the State/UTs, stratification is done afresh by grouping units belonging to District X 3- digit NIC for each state to form strata. The sample units are then drawn circular systematically from each stratum. The basic purpose of introducing the residual sample was to increase the sample size for the sample sector of the states so as to get more reliable estimates at district level.
Validated state-wise unit-level data of the central sample are also sent to the states for pooling this data with their surveyed data to get a combined estimate at the sub-state level.
For ASI 2007-2008, the Census Sector has been defined as follows:
a) All industrial units belonging to the five less industrially developed states/ UT's viz. Manipur, Meghalaya, Nagaland, Tripura and Andaman & Nicobar Islands.
b) For the rest of the twenty-six states/ UT's., (i) units having 100 or more workers, and (ii) all factories covered under Joint Returns.
c) After excluding the Census Sector units as defined above, all units belonging to the strata (State by 4-digit of NIC-08) having less than or equal to 4 units are also considered as Census Sector units.
Sample Sector: From the remaining units excluding those of Census Sector, called the sample sector, samples are drawn circular systematically considering sampling fraction of 20% within each stratum (State X Sector X 4-digit NIC) for all the states. An even number of units with a minimum of 4 are selected and evenly distributed in two sub-samples. The sectors considered here are Biri, Manufacturing and Electricity.
Selection of State Samples: After selecting the central sample in the way mentioned above, the remaining units in the sample sector are treated as residual frame for selection of sample units for the States/UTs. Note that for the purpose of selecting samples from the residual frame for the State/UTs, stratification is done afresh by grouping units belonging to District X 3- digit NIC for each state to form strata. The sample units are then drawn circular systematically from each stratum. The basic purpose of introducing the residual sample was to increase the sample size for the sample sector of the states so as to get more reliable estimates at district level.
Validated state-wise unit-level data of the central sample are also sent to the states for pooling this data with their surveyed data to get a combined estimate at the sub-state level.
Deviations from the Sample Design
The sampling design adopted in ASI has undergone considerable changes from time to time, taking into account the technical and other requirements. The present sampling design has been adopted from ASI 2007-08. All the factories in the updated frame are divided into two sectors, viz., Census and Sample.
Weighting
WGT (Multiplier Factor) is the weighing variable from Block A : Identification Block.
For Census data WGT has been given weight as 1.
For Census data WGT has been given weight as 1.
Data Collection
Dates of Data Collection (YYYY/MM/DD)
| Start date | End date |
|---|---|
| 2011-09-01 | 2012-03-31 |
Mode of data collection
Statutory return submitted by factories as well as Face to Face
Supervision
NSSO under the the Ministry of Statistics and PI, Government of India is responsible for supervision of data collection.
The collection of statistics act and rules framed there under has been revised. As per revised rules 2011 under the Collection of Statistical Act 2008, the consultation of Nodal Officer of Central Government is mandatory for conducting any Survey (Section 5[2]). The Nodal Officer is a designated Officer, not below the rank of Joint Secretary, Government of India of nodal department dealing with Statistical matters, for exercising powers and performing duties under these rules (Section 3[1]). Now under the revised rules (Rule 7), a Statistics Officer for a specified period and specified territory is required to be appointed (Section 4 of the revised Act 2008) to conduct the Survey. The statistics Officer is empowered by the Act (Sub-section 4 or 6 of Section 4 of the Act) to collect or authorize officials to collect information from any industrial and commercial concern.
The collection of statistics act and rules framed there under has been revised. As per revised rules 2011 under the Collection of Statistical Act 2008, the consultation of Nodal Officer of Central Government is mandatory for conducting any Survey (Section 5[2]). The Nodal Officer is a designated Officer, not below the rank of Joint Secretary, Government of India of nodal department dealing with Statistical matters, for exercising powers and performing duties under these rules (Section 3[1]). Now under the revised rules (Rule 7), a Statistics Officer for a specified period and specified territory is required to be appointed (Section 4 of the revised Act 2008) to conduct the Survey. The statistics Officer is empowered by the Act (Sub-section 4 or 6 of Section 4 of the Act) to collect or authorize officials to collect information from any industrial and commercial concern.
Characteristics of Data Collection Situation - Notes on data collection
ASI Schedule has two parts: Part-I and Part-II. Part-I of ASI schedule aims to collect data on assets and liabilities, employment and labour cost, receipts, expenses, input items – indigenous and imported, products and byproducts, distributive expenses etc. Part-II of ASI schedule aims to collect data on different aspects of labour statistics, namely, working days, mandays worked, absenteeism, labour turnover, man-hours worked, earning and social security benefits.
The major additions and deletions of items in ASI 2010-11 schedules in comparison to ASI 2009-10 schedules are given below.
(a) Information on 'How many total number of units the company has' collected in Block B of ASI 2009-10 has been dropped.
(b) Information on 'Original value of investment in plant and machinery (range code)' collected in Block B of ASI 2009-10 has been dropped. Information on 'Subsidy' will be additionally collected in Block-G.
(c) Item codes in Blocks H, I and J are now to be reported as per NPCMS, 2011 instead of ASICC.
The Joint Return should only be compiled in the following cases:
(i) The units must be having the same State code;
(ii) The units should have the same management;
(iii) Separate unit-wise accounts are not available and only combined accounts are available;
(iv) Resources that go into the manufacturing activity in the units are not separately identifiable;
(v) The units may not have the same industry group at 4 digit NIC level, but satisfy the aforementioned conditions. However, all the units included in Joint Return must be engaged in manufacturing and if the combined accounts include other activities, those should be excluded.
In no case a unit belonging of Census Sector will be the joint unit with a unit of Sample Sector. If such a situation arises due to augmentation of frame in respect of the units pertaining to the supplementary frame, information pertaining to the Sample Sector unit(s) needs to be suitably apportioned and separate return should be filled in for each of them. Please note that in case of sample sector the number of units will be always 1.
Block A, item 12: status of units: This item will be recorded in codes. The
number of „status of unit? codes used in ASI - being too many – has been rationalised and
are given below:
Open ........ ................................ ............................... 1,
Closed (for less than or equal to 3 years)........................ 2,
NOP (for less than or equal to 3 years)............................. 3,
Deleted ............... ................. ........................ ......... .... 4,
Existing but non-response due to closure and
owner / occupier is not traceable............. .......... ........... 5
Non-response due to non-existence and owner not traceable
(incl. the case of non-existent for more than 3 years) ........... 6
Non-response due to production not yet started or accounting year not closed during the year .................. .............. 7
Non-response due to other reasons [incl. relevant records are with Court / Income tax or recalcitrant/refuse to submit the return, or factory under prosecution in respect of earlier ASI].... .................... 8
Deleted due to any other reason (incl. de-registration; out of coverage i.e. defence, oil storage, technical training Institute etc. and hotel , etc; and other reason) .............. .......... ... ....................... 9
The following may be noted:
A unit is considered to be closed if the unit is maintaining staff but not having production. Such units will be assigned code 2 only if the information in respect
of assets, employee etc. are available. On the other hand, if the unit is existing but no information is available due to closure and owner/occupier is not traceable, the
unit will be assigned the code 5.
A unit is considered to be Non Operating (NOP) if the unit remained closed for 3 consecutive years or it has no production and not maintaining the staff. A NOP
unit will be assigned code 3 only if the information in respect of assets, etc. are available. Else it will be assigned code 5.
A unit is considered for deletion and code 4 will be assigned if the unit is having continuous status of NOP for three years or more, and proposed by FOD for
deletion from the frame.
Code 7 will be assigned in the cases where a new unit has not started its production or did not close the account during the accounting year.
No code other than the codes 1-9 can be given here. In no case this item will be left blank.
The major additions and deletions of items in ASI 2010-11 schedules in comparison to ASI 2009-10 schedules are given below.
(a) Information on 'How many total number of units the company has' collected in Block B of ASI 2009-10 has been dropped.
(b) Information on 'Original value of investment in plant and machinery (range code)' collected in Block B of ASI 2009-10 has been dropped. Information on 'Subsidy' will be additionally collected in Block-G.
(c) Item codes in Blocks H, I and J are now to be reported as per NPCMS, 2011 instead of ASICC.
The Joint Return should only be compiled in the following cases:
(i) The units must be having the same State code;
(ii) The units should have the same management;
(iii) Separate unit-wise accounts are not available and only combined accounts are available;
(iv) Resources that go into the manufacturing activity in the units are not separately identifiable;
(v) The units may not have the same industry group at 4 digit NIC level, but satisfy the aforementioned conditions. However, all the units included in Joint Return must be engaged in manufacturing and if the combined accounts include other activities, those should be excluded.
In no case a unit belonging of Census Sector will be the joint unit with a unit of Sample Sector. If such a situation arises due to augmentation of frame in respect of the units pertaining to the supplementary frame, information pertaining to the Sample Sector unit(s) needs to be suitably apportioned and separate return should be filled in for each of them. Please note that in case of sample sector the number of units will be always 1.
Block A, item 12: status of units: This item will be recorded in codes. The
number of „status of unit? codes used in ASI - being too many – has been rationalised and
are given below:
Open ........ ................................ ............................... 1,
Closed (for less than or equal to 3 years)........................ 2,
NOP (for less than or equal to 3 years)............................. 3,
Deleted ............... ................. ........................ ......... .... 4,
Existing but non-response due to closure and
owner / occupier is not traceable............. .......... ........... 5
Non-response due to non-existence and owner not traceable
(incl. the case of non-existent for more than 3 years) ........... 6
Non-response due to production not yet started or accounting year not closed during the year .................. .............. 7
Non-response due to other reasons [incl. relevant records are with Court / Income tax or recalcitrant/refuse to submit the return, or factory under prosecution in respect of earlier ASI].... .................... 8
Deleted due to any other reason (incl. de-registration; out of coverage i.e. defence, oil storage, technical training Institute etc. and hotel , etc; and other reason) .............. .......... ... ....................... 9
The following may be noted:
A unit is considered to be closed if the unit is maintaining staff but not having production. Such units will be assigned code 2 only if the information in respect
of assets, employee etc. are available. On the other hand, if the unit is existing but no information is available due to closure and owner/occupier is not traceable, the
unit will be assigned the code 5.
A unit is considered to be Non Operating (NOP) if the unit remained closed for 3 consecutive years or it has no production and not maintaining the staff. A NOP
unit will be assigned code 3 only if the information in respect of assets, etc. are available. Else it will be assigned code 5.
A unit is considered for deletion and code 4 will be assigned if the unit is having continuous status of NOP for three years or more, and proposed by FOD for
deletion from the frame.
Code 7 will be assigned in the cases where a new unit has not started its production or did not close the account during the accounting year.
No code other than the codes 1-9 can be given here. In no case this item will be left blank.
Data Collectors
| Name | Abbreviation | Affiliation |
|---|---|---|
| Field Operation Division, NSSO | NSSO( FOD) | Ministry of Statistics and Programme Implementation |
Questionnaires
Type of Research Instrument
Annual Survey of Industries Questionnaire is divided into different blocks:
BLOCK A.IDENTIFICATION BLOCK - This block has been designed to collect the descriptive identification of the sample enterprise. The items are mostly self-explanatory.
BLOCK B. TO BE FILLED BY OWNER OF THE FACTORY - This block has been designed to collect the particulars of the sample enterprise. This point onwards, all the facts and figures in this return are to be filled in by owner of the factory.
BLOCK C: FIXED ASSETS - Fixed assets are of a permanent nature having a productive life of more than one year, which is meant for earning revenue directly or indirectly and not for the purpose of sale in ordinary course of business. They include assets used for production, transportation, living or recreational facilities, hospital, school, etc. Intangible fixed assets like goodwill, preliminary expenses including drawing and design etc are excluded for the purpose of ASI. The fixed assets have, at the start of their functions, a definite value, which decreases with wear and tear. The original cost less depreciation indicates that part of value of fixed assets, which has not yet been transferred to the output. This value is called the residual value. The value of a fixed asset, which has completed its theoretical working life should always be recorded as Re.1/-. The revalued value is considered now. But depreciation will be taken on original cost and not on revalued cost.
BLOCK D: WORKING CAPITAL & LOANS - Working capital represents the excess of total current assets over total current liabilities.
BLOCK E : EMPLOYMENT AND LABOUR COST - Particulars in this block should relate to all persons who work in and for the establishment including working proprietors and active business partners and unpaid family workers. However, Directors of incorporated enterprises who are paid solely for their attendance at meeting of the Board of Directors are to be excluded.
BLOCK F : OTHER EXPENSES - This block includes the cost of other inputs as both the industrial and nonindustrial service rendered by others, which are paid by the factory and most of which are reflected in the ex-factory value of its production during the accounting year.
BLOCK G : OTHER INCOMES - In this block, information on other output/receipts is to be reported.
BLOCK H: INPUT ITEMS (indigenous items consumed) - This block covers all those goods (raw materials, components, chemicals, packing material, etc.), which entered into the production process of the factory during the accounting year. Any material used in the production of fixed assets (including construction work) for the factory's own use should also be included. All intermediate products consumed during the year are to be excluded. Intermediate products are those, which are produced by the factory but are, subjected to further manufacture. For example, in a cotton textile mill, yarn is produced from raw cotton and the same yarn is again used for manufacture of cloth. An intermediate product may also be a final product in the same factory. For example, if the yarn produced by the factory is sold as yarn, it becomes a final product and not an intermediate product. If however, a part of the yarn produced by a factory is consumed by it for manufacture of cloth, that part of the yarn so used will be an intermediate product.
BLOCK I: INPUT ITEMS – directly imported items only (consumed) - Information in this block is to be reported for all imported items consumed. The items are to be imported by the factory directly or otherwise. The instructions for filling up of this block are same as those for Block H. All imported goods irrespective of whether they are imported directly by the unit or not, should be recorded in Block I. Moreover, any imported item, irrespective of whether it is a basic item for manufacturing or not, should be recorded in Block I. Hence 'consumable stores' or 'packing items', if imported, should be recorded in Block I and not in Block H.
BLOCK J: PRODUCTS AND BY-PRODUCTS (manufactured by the unit) - In this block information like quantity manufactured, quantity sold, gross sale value, excise duty, sales tax paid and other distributive expenses, per unit net sale value and ex-factory value of output will be furnished by the factory item by item. If the distributive expenses are not available product-wise, the details may be given on the basis of reasonable estimation.
BLOCK A.IDENTIFICATION BLOCK - This block has been designed to collect the descriptive identification of the sample enterprise. The items are mostly self-explanatory.
BLOCK B. TO BE FILLED BY OWNER OF THE FACTORY - This block has been designed to collect the particulars of the sample enterprise. This point onwards, all the facts and figures in this return are to be filled in by owner of the factory.
BLOCK C: FIXED ASSETS - Fixed assets are of a permanent nature having a productive life of more than one year, which is meant for earning revenue directly or indirectly and not for the purpose of sale in ordinary course of business. They include assets used for production, transportation, living or recreational facilities, hospital, school, etc. Intangible fixed assets like goodwill, preliminary expenses including drawing and design etc are excluded for the purpose of ASI. The fixed assets have, at the start of their functions, a definite value, which decreases with wear and tear. The original cost less depreciation indicates that part of value of fixed assets, which has not yet been transferred to the output. This value is called the residual value. The value of a fixed asset, which has completed its theoretical working life should always be recorded as Re.1/-. The revalued value is considered now. But depreciation will be taken on original cost and not on revalued cost.
BLOCK D: WORKING CAPITAL & LOANS - Working capital represents the excess of total current assets over total current liabilities.
BLOCK E : EMPLOYMENT AND LABOUR COST - Particulars in this block should relate to all persons who work in and for the establishment including working proprietors and active business partners and unpaid family workers. However, Directors of incorporated enterprises who are paid solely for their attendance at meeting of the Board of Directors are to be excluded.
BLOCK F : OTHER EXPENSES - This block includes the cost of other inputs as both the industrial and nonindustrial service rendered by others, which are paid by the factory and most of which are reflected in the ex-factory value of its production during the accounting year.
BLOCK G : OTHER INCOMES - In this block, information on other output/receipts is to be reported.
BLOCK H: INPUT ITEMS (indigenous items consumed) - This block covers all those goods (raw materials, components, chemicals, packing material, etc.), which entered into the production process of the factory during the accounting year. Any material used in the production of fixed assets (including construction work) for the factory's own use should also be included. All intermediate products consumed during the year are to be excluded. Intermediate products are those, which are produced by the factory but are, subjected to further manufacture. For example, in a cotton textile mill, yarn is produced from raw cotton and the same yarn is again used for manufacture of cloth. An intermediate product may also be a final product in the same factory. For example, if the yarn produced by the factory is sold as yarn, it becomes a final product and not an intermediate product. If however, a part of the yarn produced by a factory is consumed by it for manufacture of cloth, that part of the yarn so used will be an intermediate product.
BLOCK I: INPUT ITEMS – directly imported items only (consumed) - Information in this block is to be reported for all imported items consumed. The items are to be imported by the factory directly or otherwise. The instructions for filling up of this block are same as those for Block H. All imported goods irrespective of whether they are imported directly by the unit or not, should be recorded in Block I. Moreover, any imported item, irrespective of whether it is a basic item for manufacturing or not, should be recorded in Block I. Hence 'consumable stores' or 'packing items', if imported, should be recorded in Block I and not in Block H.
BLOCK J: PRODUCTS AND BY-PRODUCTS (manufactured by the unit) - In this block information like quantity manufactured, quantity sold, gross sale value, excise duty, sales tax paid and other distributive expenses, per unit net sale value and ex-factory value of output will be furnished by the factory item by item. If the distributive expenses are not available product-wise, the details may be given on the basis of reasonable estimation.
Data Processing
Cleaning Operations
Data submitted by the factories undergo manual scrutiny at different stages.
1) They are verified by field staff of NSSO from factory records.
2) Verified returns are manually scrutinized by senior level staff before sending to data processing centre.
3) At the data processing centre these are scrutinized before data entry.
4) The entered data are subjected to computer editing and corrections.
5) Tabulated data are checked for anomalies and consistency with previous results.
1) They are verified by field staff of NSSO from factory records.
2) Verified returns are manually scrutinized by senior level staff before sending to data processing centre.
3) At the data processing centre these are scrutinized before data entry.
4) The entered data are subjected to computer editing and corrections.
5) Tabulated data are checked for anomalies and consistency with previous results.
Data Appraisal
Estimates of Sampling Error
Relative Standard Error (RSE) is calculated in terms of worker, wages to worker and GVA using the formula (Pl ease refer to Estimation Procedure document in external resources).
Data Appraisal
To check for consistency and reliability of data the same are compared with the NIC-2digit level growth rate at all India Index of Production (IIP) and the growth rates obtained from the National Accounts Statistics at current and constant prices for the registered manufacturing sector.
Data access
Contact
| Name | Affiliation | URI | |
|---|---|---|---|
| ASI Processing and Report | Deputy Director General, CSO (IS Wing) 1, Council House Street, Kolkata | cso_isw@yahoo.co.in | www.mospi.nic.in |
| Data Dissemination | Deputy Director General, Computer Centre, East Block-10, R K Puram, New Delhi | pc.mohanan@nic.in | www.mospi.nic.in |
| Data Dissemination | Deputy Director, Computer Centre, East Block-10, R K Puram, New Delhi | asiunitdata@gmail.com | www.mospi.nic.in |
Confidentiality Declaration
The ASI data at factory level are strictly confidential and are to be used only for statistical purposes after aggregation.
The collection of Statistics Act assures confidentiality of the data to the factories.
To ensure confidentiality, data of factories with less than three units in an industry are merged. Location of the unit is also not divulged in the micro data.
Conditions
Data is chargeable. Document accessing for data may be seen at "Data Access" tab on home page of Micro Data Archieve.
Citation requirement
ASI Survey 2010-11, provided by CSO(IS Wing) Kolkata.
Contact
| Name | Affiliation | URI | |
|---|---|---|---|
| Deputy Director General | Computer Center, Ministry of Statistics and P.I | pc.mohanan@nic.in | mospi.nic.in |
| Deputy Dtrector General | CSO(IS Wing), Kolkata, Ministry of Statistics and P.I | cso_isw@yahoo.co.in | mospi.nic.in |
Disclaimer and copyrights
Disclaimer
The user of the data acknowledges that the original collector of the data, the authorised distributor of the data, and the relevant funding agency bear no responsibility for use of the data or for interpretations or inferences based upon such uses.
Copyright
ASI 2010-11, CSO(IS Wing), Kolkata
Metadata production
Document ID
DDI_IND_2010_ASI_v01_M_CSO
Producers
| Name | Abbreviation | Affiliation | Role |
|---|---|---|---|
| Computer Centre, Ministry of Statistics and P I | MOSPI, CC | Ministry of Statistics and PI | Study Document |
Date of Production
2013-06-12
Document version
version1.2 (June, 2013)